VGP ballast plate of 3000 KG RAL9007

When rigging with slings, it is important to use the 4 designated attachment points. Adhere to the allowable loads and ensure the load is distributed to avoid tipping. It is also recommended not to exceed the number of additional weights specified per housing and to use certified lifting equipment.

• No designated locations for weights LO25 KG (if necessary, a study should be planned).
• Provision for weight adjustment by adding lead possible upon request.
• Certification of weights according to OIML or ASTM standards available upon request.

The storage of ballast masses in stacked mode must take into account the permissible loads, the flatness of the ground, and safety guidelines. For periodic general inspections (PGI), plan for a check at least every 12 months for overhead cranes, hoists, and winches, and every 6 months for forklifts and aerial work platforms. ● Never stack beyond the specifications (consult the specific technical sheet if stacking).

• Protect the surface against moisture to prevent any superficial corrosion.
• Identify each mass with its reference and weight to facilitate traceability and the PGI.

Never stack beyond the specifications (consult specific technical sheet if stacking).
Protect the surface against moisture to prevent any superficial corrosion.
Identify each mass with their reference and weight to facilitate traceability and VGP.